Electrolux E32AF75JPS オーナーマニュアル

* Metal parts undergo expansion and 

contraction, as in hot water pipes.

* Freezer (used to cool refrigerator is 

circulating throughout the system.

* Freezer is not level. It rocks on the 

fl oor when it is moved slightly.

* Floor is uneven or weak.

* Freezer is touching the wall.

* Weather is hot and humid, which
  increases internal rate of frost buildup.

* Door is slightly open.
* Door is kept open too long or is
  opened too frequently.

* Interior needs to be cleaned.

* Foods stored in Freezer have strong 

odors.

* Freezer is not level. It rocks on the     

fl oor when it is moved slightly.

* Floor is uneven or weak.

* The LED or light bulb is
   burned out.

*  No electric current is reaching the
   Freezer. 

* Control is in Sabbath mode (Sb is 

displayed on control)

* This is normal. Sound will level off or disappear as
  Freezer continues to run.

* This is normal.

 

* Level the Freezer. Refer to “LEVELING” section.

* Ensure fl oor can adequately support Freezer. Level Freezer 

by putting wood or metal shims under part of the Freezer.

* Re-level Freezer or move Freezer slightly. Refer to 

“LEVELING” section.

* This is normal.

* See “DOOR PROBLEMS”.
* Open the door less often.

* Clean interior with sponge, warm water, and baking soda.    

Replace air fi lter.

* Cover the food tightly.

* This condition can force the cabinet out of square and 

misalign the door.  Refer to “LEVELING” section.

* Ensure fl oor can adequately support Freezer.  Level the 

Freezer by putting wood or metal shims under part of the 
Freezer.

* Follow directions under “INTERIOR LIGHTING” in the 

“FREEZER FEATURES” section.

* See “FREEZER DOES NOT RUN”.

* Depress TEMP MODE key and CONTROL LOCK key for 3 

seconds.

 

  Handles are secure and tight

 

  Door seals completely to cabinet on all sides

 

  Freezer door is level across the top

 

  Freezer is level, side-to-side and front-to- 
 back

 

  Toe grille is properly attached to freezer

 

  Cabinet is setting solid on all corners

 

  House power turned on

 

  Freezer plugged in

 

  Air Filter is installed

 

  Shipping material removed

 

  Freezer temperatures set

 

  Water turned on

 

  Registration card sent in