Electrolux E36DF76PPS オーナーマニュアル

Note

the Wok cooking performance is best on the right front PoWeR burner

position.

Figure 1

Flat-bottom woks with large flat

bottoms may also be used on your

cooktop Surface Burner Grates

without the Wok Stand (See

Figure 2). Insure the stability of

the flat-bottom wok before cooking

without the Wok Stand. If unstable,

DO NOT use the flat-bottom wok

without the Wok Stand.

Round-bottom woks (with

a support ring) should NOT

be used (See Figure 3). The

supporting ring was not designed

for proper or stable use on the

Surface Burner Grates.

Proper use of flat-bottom wok

on Surface Burner Grate

Figure 2

Improper use of round-bottom wok

on Surface Burner Grate

Figure 3

Surface Cooking

usinG tHe Wok stand

The Wok Stand provided with your cooktop is designed to allow round-bottomed woks to

be used.

It is recommended that you use a 14 inch diameter (35.5 cm) or less Wok.

It is recommended that you use the right front

POWER burner with the wok stand for best

performance. If properly positioned, the Wok Stand will not slide off the grate.

To Properly Position the Wok Stand:

With the grate in position over the burner, set the Wok Stand on top of the grate positioning

the notches in the Wok Stand over the cooktop grate fingers (See Figure 1).

cautioN

always use potholders to remove the wok stand from the grate. allow the wok stand to cool

before removing. Do not set hot wok stand on surfaces that cannot withstand high heat; such as

countertops.
be sure the Wok stand is positioned correctly and stable before use to prevent hot spills and

possible burns.

cautioN

be sure to alWaYs use the Wok stand if the stability of the wok is

uncertain. If cooking large amounts of liquid food without the Wok Stand,

the wok may tip and spill over causing burns.