Electrolux EI30EW45KB オーナーマニュアル

The oven control has a factory preset built-in 

12 Hour Energy Saving feature that will shut off 

the oven if the oven control is left on for more 

than 11 hours and 59 minutes. The oven can be 

programmed to override this feature for Continuous 

Baking.

1.  Press 

USER PREF until you get to the E S 

menu page.

2.  Press 

lO or HI to toggle the energy saving 

setting on and off.

3.  Press 

START to accept the changes and go 

back to user preferences menu display.

4.  Press 

CANCEl when finished to get back to

the standard oven display.

The Audio Control feature allows the oven 

control to be operated without sounds or beeps 

whenever necessary. If desired the control can be 

programmed for silent operation and later returned 

to operating with all the default sounds and beeps. 

The volume of the beeps can also be adjusted.

1.  Press 

USER PREF until you get to the AUd 

menu page.

2.  Press 

lO or HI to toggle between the available 

volume settings. 

AUd 5 for the highest volume 

setting to 

AUd 1 for the lowest volume. AUd 

OFF to disable the beeps.

3.  Press 

START to accept the changes and go 

back to user preferences menu display.

4.  Press 

CANCEl when finished to get back to

the standard oven display.

The temperature in the oven has been pre-set at 

the factory. When first using the oven, be sure to

follow recipe times and temperatures. If you think 

the oven is too hot or too cool, the temperature in 

the oven can be adjusted. Before adjusting, test a

recipe by using a temperature setting that is higher 

or lower than the recommended temperature. The 

baking results should help you to decide how much 

of an adjustment is needed. Each oven can be

individually adjusted.

1.  Press 

USER PREFERENCES until you get to 

the 

UPO menu page.

2.  If you want to adjust the temperature in the

lower oven, press 

again.

 UPO will appear in the lower display.

3.  Enter the temperature by pressing the 

lO or HI 

pads. The temperature can only be adjusted by

± 35°F.

4.  Press 

START to accept the changes and go 

back to user preferences menu display.

5.  Press 

CANCEl when finished to get back to

the standard oven display.

The oven control can be set to return to its original 

factory settings. This includes: Setting the Clock 

ON/OFF to ON, Setting the clock display mode to 

12h, Display mode to Fahrenheit, Setting the oven

temperature adjustment to zero, Setting audio level

to 5 and Enabling the 12h energy saving mode. 

Reseting the control also erase the My Favorite

recipes.

1.  Press 

USER PREF until you get to the rSt no 

menu page.

2.  Press 

lO or HI to select yES.

3.  Press 

START to reset to default factory 

settings.