Logic3 i-Station25 WIP025* ユーザーズマニュアル

6

E

N

g

LIS

H

The i-Station25 also offers the ability to allow other portable audio devices such as iPod shuffle, MP3, MiniDisc and 

Portable CD Players to be connected for use as a speaker system.

Remove the battery cover by sliding it upwards.

1. 

Plug in the line in cable into the rear of the i-Station25 Line in Socket.

2. 

Replace the battery compartment cover (Ensure the wire goes through the slot of the battery compartment cover)

3. 

Connect the other end of the line in cable to your device.

4. 

Set your device volume to Maximum.

5. 

Turn on your i-Station.

6. 

Total 8W output (4W / Channel) 
Full range (40 mm) x 2 per Channel
Distortion <= 1 %
S/N ratio: 60dB
Frequency Response: 200Hz – 16k Hz
Provided Power Adaptor: 5VDC @ 2A

iPhone / iPhone3g :640 x 480 pixels (Max)
iPod touch / touch 2g: 640 x 480 pixels (Max)
iPod classic: 640 x 480 pixels (Max)
iPod nano 3g / 4g: 640 x 480 pixels (Max)
iPod 5g: 480 x 480 pixels (Max)

i-Station does not turn ON when powered via AC Mains

Check the AC power cable is connected firmly into the AC wall outlet and the 
i-Station.

Test the i-Station by powering the unit with 4 x AA batteries.

i-Station does not turn ON when powered via Batteries

Test the i-Station by powering the unit via AC Mains, if this works replace the 
batteries with new ones.

No sound

Ensure the line in cable is not plugged into the i-Station

Check Play status on the iPod/iPhone.

Please try updating the firmware for your iPod/iPhone  using the latest iTunes 
which is available from www.apple.com/ipod/download

Check i-Station is not in power save mode. Press any button to exit this mode

Check the MUTE function is not ON by pressing the MUTE on the remote 
control

Sound Quality is poor

If you are using AA Batteries, replace them with new ones.

iPod/iPhone is not recharging

Ensure your i-Station is connected to the AC Mains 

I have lost a part for the i-Station

Please refer to the spare parts section in this manual