Philips BT50G/00 ユーザーズマニュアル

4 Play from

Bluetooth

devices

With this speaker, you can listen to audio from

Bluetooth-enabled devices.

Note

•

The speaker can memorize a maximum of four paired

devices. The fifth paired device will replace the first one.

•

Any obstacle between this speaker and a Bluetooth

device can reduce the operational range.

•

Keep away from any other electronic device that may

cause interference.

•

The operational range between this speaker and a

Bluetooth device is approximately 10 meters (30 feet).

•

Make sure that no audio input cable is connected to

the AUDIO IN socket.

Connect a device

Slide the source selector to .

The LED indicator flashes blue.

On your Bluetooth device, enable

Bluetooth and search for Bluetooth devices

that can be paired (refer to the user

manual of the device).

Select [Philips BT50] or [Philips BT25]

displayed on your device for pairing and

connection. If necessary, input “0000” as

the pairing password.

After successful pairing and connection,

the speaker beeps twice, and the LED

indicator turns solid blue.

• If you cannot find [Philips BT50] or

[Philips BT25] on your device, press

and hold PAIRING for more than

three seconds until you hear triple

beeps.

Play audio on the Bluetooth device.

Tip

•

You can use your Bluetooth device to control play.

LED indicator (blue)

Indicator

Bluetooth connection status

Fast flashing (2Hz) Pairing
Slow flashing (1Hz) Connecting
Solid blue

Connected

Disconnect a device

• Press and hold PAIRING for more than

three seconds;

The speaker beeps for three times.

• Disable Bluetooth on your device; or

• Move the device beyond the

communication range.

The speaker beeps twice, and the LED

indicator flashes blue.

Note

•

Before connecting another Bluetooth device, disconnect

the current device first.