Philips NP2500/05 ユーザーズマニュアル

14

1

  Ensure that your network name and 

network password or encryption key are 

available.

2

  Turn on your wireless access point or 

wireless router with broadband Internet 

access.

3

  Follow the steps in chapter First-time 

connection to home network until 

NP2500 shows the prompt for the 

network setup.

4

  Select [Wireless (WiFi)] to start the 

network setup process.

For wireless routers with Wi-Fi 

• 

protection system (WPS) that supports 

push button configuration (PBC): On the 

router, press the WPS PBC push button 

to activate. On NP2500 press OK to 

confirm.)

For wireless routers with Wi-Fi 

• 

protection system (WPS) that supports a 

personal identification number (PIN): On 

NP2500 select WPS PIN, then enter the 

displayed PIN on the router.

For other wireless routers: 

• 

NP2500 searches for networks.

 

»

1

  Select your network from the list of 

found networks and confirm.

Enter the encryption key (if required) 

• 

and confirm.

NP2500 tries to acquire an 

• 

automatic IP address.

2

  Press BACK   to enter your IP address 

manually.

3

  Enter your static IP address and confirm.

NP2500 shows the confirmation for 

 

»

the connection to the network.
NP2500 shows the prompt for the 

 

»

connection to the Internet.

4

  Select [Yes] to connect to the Internet.

NP2500 shows the confirmation for 

 

»

the connection to the Internet.

2

  Select [Yes] to connect to the Internet.

NP2500 shows the confirmation for 

 

»

the connection to the Internet.

Note

You can enter more than one encryption key. 

 

•

In this case, NP2500 prompts you to select the 

default encryption key.

First-time setup: Wireless connection 

with static IP address

This is how to navigate and select with the 

remote control:

Press 

• 

 or   to select a menu option.

Press 

• 

OK to confirm a selection.

Press 

• 

BACK   to go back to the 

previous screen.

Press 

• 

HOME to go to the Home menu.

The alphanumeric buttons of the remote 

control are multi-function buttons:

To select a number or an alphanumeric 

• 

character, press a button once or 

repeatedly until you see the number or 

alphabetic character in the display of 

NP2500.

To cycle through the alphanumeric 

• 

characters that are available, press a 

button repeatedly.

To delete the last character entry from 

• 

the display, press CLEAR.

To delete the whole last line entry 

• 

from the display, press and hold 

CLEAR. 

The onscreen display guides you 

through the process of connecting 

NP2500 to your home network and 

the Internet. This section describes 

the typical wireless setup with static 

IP address. You can also follow the 

onscreen prompts for advanced 

configurations that are not described 

in this manual.

EN