Philips NP2500/05 ユーザーズマニュアル
28
To delete the last character entry from
•
the display, press CLEAR.
To delete the whole last line entry
•
from the display, press and hold
CLEAR.
The onscreen display guides you
through the process of connecting
NP2500 to your home network and
the Internet. This section describes
the typical wired setup with static
IP address. You can also follow the
onscreen prompts for advanced
configurations that are not described
in this manual.
1
Connect an Ethernet cable (sold
separately) to the ETHERNET jack of
NP2500 and the Ethernet jack of the
wired router.
2
Ensure that the wired router is turned on
and has broadband Internet access.
3
Turn on NP2500.
4
Press SETTINGS, to go to the Settings
menu.
5
Select [Wired (Ethernet)] to start the
network setup process.
NP2500 tries to acquire an automatic
»
IP address.
Press
Press
»
BACK to enter your IP
address manually.
6
Enter your static IP address and confirm.
NP2500 shows the confirmation for
»
the connection to the network.
NP2500 shows the prompt for the
NP2500 shows the prompt for the
»
connection to the Internet.
7
Select [Yes] to connect to the Internet.
NP2500 shows the confirmation for
»
the connection to the Internet.
advanced configurations that are not
described in this manual.
1
Connect an Ethernet cable (sold
separately) to the ETHERNET jack of
NP2500 and the Ethernet jack of the
wired router.
2
Ensure that the wired router is turned on
and has broadband Internet access.
3
Turn on NP2500.
4
Press SETTINGS, to go to the Settings
menu.
5
Select [Wired (Ethernet)] to start the
network setup process.
NP2500 acquires the automatic IP
»
address.
NP2500 shows the confirmation for
NP2500 shows the confirmation for
»
the connection to the network.
NP2500 shows the prompt for the
NP2500 shows the prompt for the
»
connection to the Internet.
6
Select [Yes] to connect to the Internet.
NP2500 shows the confirmation for
»
the connection to the Internet.
Wired connection with static IP
address
This is how to navigate and select with the
remote control:
Press
•
or to select a menu option.
Press
•
OK to confirm a selection.
Press
•
BACK to go back to the
previous screen.
Press
•
HOME to go to the Home menu.
The alphanumeric buttons of the remote
control are multi-function buttons:
To select a number or an alphanumeric
•
character, press a button once or
repeatedly until you see the number or
alphabetic character in the display of
NP2500.
To cycle through the alphanumeric
•
characters that are available, press a
button repeatedly.
EN