Philips BDH4222V/00 ユーザーズマニュアル

1

Connect the green (labeled as "Y") jack of the HDTV Set-top box to 
the green "Y1" jack of the monitor.

2

Connect the red (labeled as "PR" or "CR") jack of the HDTV 
Set-top box to the red "PR1/CR1" jack of the monitor.

3

Connect the blue (labeled as "PB" or "CB") jack of the HDTV 
Set-top box to the blue "PB1/CB1" jack of the monitor.

4

Connect the red (R) and white (L) audio jacks of the HDTV 
Set-top box to the R and L audio-in jacks of the monitor.

●

Some HDTV Set-top boxes may not have a Component Video 
output. Instead, use RGB input method.

●

There are two sets of component inputs provided. You can use 
either set of component inputs to connect your HDTV Set- top box.

1

Connect the 15-pin D-Sub RGB connector of the HDTV Set-top box 
to the RGB-IN connector of the monitor.

2

Connect the red (R) and white (L) audio-out jacks of the HDTV Set-
top box to the R and L audio-in jacks of the monitor.

●

Some HDTV Set-top boxes may not have an RGB output. 
Use Component Video input method if this is the case.

●

Upon connecting your HDTV Set-top box to the RGB input of the 
monitor, it may be necessary to adjust various picture settings on the 
monitor to correctly match the output of the HDTV Set-top box. 
This is caused by the different video timings set by various HDTV 
Set-top box manufacturers.

●

This plasma supports 576p, 720p and 1080i under RGB mode.