Philips DS8800W/10 ユーザーズマニュアル
18
Advanced sound settings
For advanced sound settings and additional
features, you can use your AirPlay device to
download the Philips Fidelio application from
Apple App Store.
Update firmware
Note
•
You can only update the firmware from a PC/Mac.
Download the update file
1
On your PC/Mac, go to www.philips.com/
support.
2
Enter the model number to find the latest
firmware upgrade file available.
3
Save the upgrade file to your hard drive.
Update from the configuration page
1
Power on the unit (see ‘Prepare - Connect
- Connect power’).
»
It takes about 35 seconds for the unit
to boot up. During boot-up, the
indicator on the front of the main unit
blinks in green quickly.
»
After boot-up, the indicator starts to
blink in green slowly.
2
Make sure that the unit and PC/Mac are
connected to the same wireless router.
Stream from your Wi-Fi enabled PC
or Mac installed with iTunes 10 (or
later)
Note
•
Before you open iTunes, make sure that you have
enabled Bonjour service in your PC. Take Windows
XP for example: to enable the service, you can click
Start->Settings->Control Panel, and double-click
Administrative Tools-> Services->Bonjour Service,
and then click Start followed by OK on the pop-up
menu.
1
Open iTunes 10 (or later).
2
Click the AirPlay icon at the bottom right
corner of the window.
3
Select
Philips_Fidelio_AirPlay XXXX (or
user customized name) from the list.
4
Select a media file and start play.
5
Wait until successful audio streaming to
the speaker.
Control play
You can select different play options from either
your AirPlay device or the supplied remote
control.
Note
•
All the operations below are based on the supplied
remote control.
• To start or pause play, press
.
• To skip to the previous or next track, press
/ .
• To adjust volume, press +/- repeatedly.
• To mute or restore volume, press .
• To switch to the AUX IN source (if
connected), press .
• To switch back to the AirPlay device
source, press .
EN