Epson SP4900DES ユーザーズマニュアル
Control panel
A
P
light (Power light)
The printer's operational status is indicated by a lit or
flashing light.
flashing light.
On
: The power is on.
Flashing
: Receiving data or performing
processes such as turning off the
power, head cleaning, auto nozzle
check, or changing the type of
black ink.
power, head cleaning, auto nozzle
check, or changing the type of
black ink.
Off
: The power is off.
B
P
button (Power button)
Turns the power on and off.
C
Screen
D
[
button (Ink menu button)
If pressed in the ready status, the Ink Menu is
displayed on the screen, and you can clean the print
head, perform a nozzle check, or switch the type of
black ink. If pressed while printing is paused, you
cannot switch the type of black ink. U
displayed on the screen, and you can clean the print
head, perform a nozzle check, or switch the type of
black ink. If pressed while printing is paused, you
cannot switch the type of black ink. U
E
l
button (Paper Source button)
❏ If pressed in the ready status, or when no paper is
loaded, the Paper Type menu is displayed, and you can
switch between roll paper and cut sheets, and check
the paper loading method. When settings are
changed, the screen icons change as shown below.
You can also make the same settings from the printer
driver. When printing from the printer driver, the
printer driver settings are given priority regardless of
the settings on the control panel.
switch between roll paper and cut sheets, and check
the paper loading method. When settings are
changed, the screen icons change as shown below.
You can also make the same settings from the printer
driver. When printing from the printer driver, the
printer driver settings are given priority regardless of
the settings on the control panel.
: Prints on roll paper and cuts
automatically after printing each
page.
page.
: Prints on roll paper but does not cut
after printing.
: Prints on cut sheets.
❏ Returns to the previous screen (Parameter > Item >
Menu > Ready) if pressed while the Menu is
displayed.
displayed.
F
u
/d buttons (Paper Feed buttons)
❏ When roll paper is loaded, you can feed (d button) or
rewind (u button) the roll paper. You can feed up to 3
m of paper by holding down the d button. You can
speed up the paper feed rate by holding down the
button for at least two seconds.
m of paper by holding down the d button. You can
speed up the paper feed rate by holding down the
button for at least two seconds.
You can rewind up to 20 cm of paper by holding down
the u button.
the u button.
❏ If you press the d button when no roll paper is loaded
and Cut Sheet is selected from the Paper Type menu,
paper is fed from the paper cassette and ejected. U
paper is fed from the paper cassette and ejected. U
❏ When feeding cut sheets from the rear manual feeder,
press the d button to feed the paper and enter ready
status. U
status. U
❏ If pressed while the Menu is displayed, you can select
Epson Stylus Pro 4900/4910 User's Guide
Introduction
13