Epson SP4900DES ユーザーズマニュアル

❏ Do not leave the printer without ink cartridges

installed. If the print head (nozzles) dries, you may
not be able to print. Leave ink cartridges in all slots
even while you do not use the printer.

❏ Because the green IC chip contains the cartridge's

own information such as the remaining ink level,
you can still reinstall and use the ink cartridge after
removing it from the printer.

❏ To avoid getting dirt on the ink supply port, store

the removed ink cartridge properly. The ink supply
port has a valve in it so it does not need to be capped.

❏ Removed ink cartridges may have ink around the

ink supply port, so be careful not to get any ink on
the surrounding area.

❏ To maintain the quality of the print head, this

printer stops printing before ink cartridges are
completely expended.

❏ Although the ink cartridges may contain recycled

materials, this does not effect printer function or
performance.

❏ Do not dismantle or remodel ink cartridges. You

may not be able to print properly.

❏ Do not drop or knock it against hard objects;

otherwise, the ink may leak.

Note the following points when handling and storing
the paper. If the paper is not in good condition, print
quality may decline.

Check the manuals supplied with each paper.

❏ Use Epson special media under normal room

conditions (temperature: 15 to 25 ˚C; humidity: 40
to 60 %).

❏ Do not fold the paper or scratch the surface of the

paper.

❏ Avoid touching the printable surface of the paper

with your bare hands. Moisture and oils from your
hands can affect print quality.

❏ Handle roll paper by holding the edges. We

recommend wearing cotton gloves.

❏ Cut sheets may be wavy or slack if the temperature

and humidity change. Be careful not to scratch or
soil the paper, and flatten it before loading it in the
printer.

❏ Do not wet the paper.

❏ Do not throw away the paper packaging as you can

use it for storing the paper.

❏ Avoid locations that are subject to direct sunlight,

excessive heat, or humidity.

❏ Keep cut sheets in their original package after

opening, and keep them in a flat place.

❏ Remove roll paper that is not in use from the

printer. Rewind it correctly and then store it in the
original packaging that came with the roll paper. If
you leave the roll paper in the printer for a long
time, its quality may decline.

To maintain long lasting, high quality print results, note
the following points.

❏ Do not rub or scratch the printed surface. If they are

rubbed or scratched, the ink may peel off.

❏ Do not touch the printed surface; the ink may peel

off.

❏ Make sure the print outs are completely dry before

folding of stacking; otherwise, the color may change
where they touch (leaves a mark). These marks will
disappear if they are separated immediately and
dried; however, they will remain if not separated.

❏ If you put the print outs in an album before they are

completely dry, they may be blurred.

❏ Do not use a dryer to dry the print outs.

❏ Avoid direct sunlight.

❏ Prevent color distortion while displaying or storing

the print outs by following the instructions in the
paper's manual.

Epson Stylus Pro 4900/4910     User's Guide