Epson SP4900DES ユーザーズマニュアル
H
Insert the paper and align its edge with the guide
line on the output tray.
line on the output tray.
I
Feed the paper.
When the paper is inserted, the screen display
changes to Press the Y button.
changes to Press the Y button.
Check that the screen display has changed, and
then press the Y button to automatically feed the
paper to the start position.
then press the Y button to automatically feed the
paper to the start position.
J
Slide out the output tray to the second and third
extensions.
extensions.
Do not raise the flap. If the flap is raised while
printing, the paper may not be ejected correctly.
printing, the paper may not be ejected correctly.
Note:
The output tray can only hold one piece of thick
paper at a time. Remove each sheet of thick paper as
it is ejected without letting the sheets stack up on the
output tray.
The output tray can only hold one piece of thick
paper at a time. Remove each sheet of thick paper as
it is ejected without letting the sheets stack up on the
output tray.
Tip:
If the paper eject support is raised, lower it before
printing.
If the paper eject support is raised, lower it before
printing.
How to eject
Thick paper is held by the paper presser after printing.
Follow the steps below to eject paper.
Follow the steps below to eject paper.
A
Check that Press the Y button is displayed on
the screen.
the screen.
B
Press the Y button to release the paper presser,
and then pull out the paper.
and then pull out the paper.
C
After removing the paper, press the Y button.
Epson Stylus Pro 4900/4910 User's Guide
Basic Operations
42