Miele KM 81-2 ユーザーズマニュアル
Description of the appliance
KM 81-2
b
Trivet
c
Wok/pan support
d
Small burner cap
e
Large burner cap
f
Burner ring
g
Large burner cap base
h
Ignitor
i
Cable for connection
to electrical supply approx. 3.6 ft
(1.10 m) long.
to electrical supply approx. 3.6 ft
(1.10 m) long.
j
Ignition safety control
k
Burner base
l
Control for burner
m
Control panel
Data plate
Because the data plate is no longer
visible once the appliance has been
built in, a 2nd data plate is supplied
which should be placed into the space
provided on page 16 of these instruc-
tions under After Sales Service.
visible once the appliance has been
built in, a 2nd data plate is supplied
which should be placed into the space
provided on page 16 of these instruc-
tions under After Sales Service.
Special accessories
Special accessories are available from
your Miele Dealer or from the Spare
Parts Department.
your Miele Dealer or from the Spare
Parts Department.
Stainless steel cover-EA 80
A stainless steel cover is available for
the KM 81-2 cooktop. Check availa-
bility in each country.
the KM 81-2 cooktop. Check availa-
bility in each country.
For installation of the cover, a minimum
distance of 20" (510 mm) is required be-
tween the countertop and wall cabi-
netry.
distance of 20" (510 mm) is required be-
tween the countertop and wall cabi-
netry.
Note:
The wok/pan support should be
removed before lowering the stainless
steel cover (EA 80).
removed before lowering the stainless
steel cover (EA 80).
Do not install the Da 8-2 directly
next to the gas hob.
next to the gas hob.
Description of the appliance
3