AMT Datasouth 4000 ユーザーズマニュアル

1.  Power on the printer.

2.  When the “ READY” message is displayed on the LCD, press [PAUSE] and

the [CANCEL] buttons simultaneously.

3.  Press [PAUSE] button to scroll to the feature that you want to change.

4.  Press [FEED] button to scroll to the desired value of the displayed feature.

5.  Once the desired value is displayed, press [CANCEL] button to save it.  After

pressing the [CANCEL] button an * should appear in the last column.  The * is
used to designate the stored value in non-volatile memory (E2PROM).

6.  Press both [PAUSE] + [CANCEL] buttons at the same time, to return to

normal mode.

Note: Do not enter set-up mode while the printer is printing or while the host is

sending data.

Next Value

Next Feature

Enter Value

Press to Enter / Exit Setup Mode