ZyXEL Communications VSG-1200 ユーザーズマニュアル

VSG-1200 User’s Guide

Chapter 4 LAN, WAN and Server Setup

59

Figure 21   System Setting: WAN/LAN: PPPoE 

The following table describes the related fields in this screen. 

Table 8   System Setting: WAN/LAN: PPPoE 

WAN Port Mode

PPPoE Select this option to activate PPPoE support.

Username

Enter the user name exactly as your ISP assigned. If assigned a name in the 

form user@domain where domain identifies a service name, then enter both 

components exactly as given.

Password

Enter the password associated with the user name above.

PPP MTU Setting

Enter the size of a Maximum Transmission Unit (MTU).

TCP MSS Setting

Enter the size of the Maximum Segment Size (MSS).

Service Name

Enter the name of your PPPoE service.

Connect on Demand Select this option when you don’t want the connection up all the time and specify 

an idle timeout in the Max Idle Time field (maximum 65535 minutes). This is the 

default setting with an idle timeout of 10 minutes.

Keep Alive

Select this option when you want the Internet connection up all the time and 

specify a redial period in the Redial Period field (maximum 65535 seconds). 

When disconnected, the VSG will attempt to bring up the connection after the 

redial period.