Sharp AR-C260 ユーザーズマニュアル
LOADING PAPER
2-7
2
1
Unlatch the duplex bypass/inverter unit
and slide it to the left.
and slide it to the left.
Unlatch the unit and
gently move it away from
the machine. If the
machine is not equipped
with a duplex bypass/
inverter unit, open the
side cover similarly.
gently move it away from
the machine. If the
machine is not equipped
with a duplex bypass/
inverter unit, open the
side cover similarly.
2
Lower the two fusing unit pressure
adjusting levers marked A and B in the
illustration.
adjusting levers marked A and B in the
illustration.
3
Gently close the duplex bypass/inverter
unit.
unit.
If the machine is not
equipped with a duplex
bypass/inverter unit,
close the side cover.
equipped with a duplex
bypass/inverter unit,
close the side cover.
Loading paper in the stand/1 x 500 sheet paper drawer/
stand/3 x 500 sheet paper drawer
stand/3 x 500 sheet paper drawer
Upper tray / middle tray / lower tray*
Up to 500 sheets of paper recommended for color or SHARP recommended plain paper can be loaded in these trays.
The method of loading paper is the same as for paper tray 1 in the main unit (see the explanation on page 2-2).
* The stand/1 x 500 sheet paper drawer only has the upper tray.
The method of loading paper is the same as for paper tray 1 in the main unit (see the explanation on page 2-2).
* The stand/1 x 500 sheet paper drawer only has the upper tray.
Specifications (stand/1 x 500 sheet paper drawer/stand/3 x
500 sheet paper drawer)
500 sheet paper drawer)
Specifications are subject to change for improvement without notice.
A
B
B:Front side of
fusing unit
Normal
position
Lower pressure
posion
posion
A:Rear side of
fusing unit
NOTE
If the size of paper being loaded is different from the previous size, or is an extra size, or if the paper type is different
from the previous type, you must change the paper tray settings in the custom settings. Change the settings as
explained in "Setting the paper type" and "Setting the paper size when an extra size is loaded" on page 2-11.
from the previous type, you must change the paper tray settings in the custom settings. Change the settings as
explained in "Setting the paper type" and "Setting the paper size when an extra size is loaded" on page 2-11.
Name
Stand/1 x 500 sheet paper drawer
Stand/3 x 500 sheet paper drawer
Paper size/weight
See "1-tray or 3-tray paper drawer" in the paper tray specifications (page 2-9)
Paper capacity
Paper recommended for color (20 lbs. or 80 g/m
2
): 500 sheets;
SHARP standard paper (20 lbs. or 80 g/m
2
): 500 sheets
Power supply
Supplied from the main unit
Power consumption
32.2 W or less
32.7 W or less
Dimensions
23-5/8" (W) x 25-9/32" (D) x 15-7/8" (H) (600 mm (W) x 642 mm (D) x 403 mm (H))
(not including the adjuster)
Weight
Approximately 49.5 lbs. or 22.5 kg
Approximately 64.9 lbs. or 29.5 kg
00-08.book 7 ページ ２００２年１１月８日 金曜日 午前９時３９分