Sharp AR-C260 ユーザーズマニュアル
SADDLE STITCH FINISHER
3-7
3
Staple cartridge replacement and staple jam removal
When the staple cartridge becomes empty or staples become jammed, a message will appear in the message
display of the operation panel.
Follow the procedure below to replace the staple cartridge or remove jammed staples.
display of the operation panel.
Follow the procedure below to replace the staple cartridge or remove jammed staples.
■
■
■
■ Staple cartridge replacement
1
Open the front cover.
2
Pull out the stapler section.
3
Remove the empty staple box.
4
Remove the empty staple cartridge.
Press the lock button to
unlock the staple box
cover and remove the
staple cartridge.
unlock the staple box
cover and remove the
staple cartridge.
5
Insert a new staple cartridge into the
staple box.
staple box.
After inserting the staple
cartridge, press down on
the staple box cover to
lock the cartridge in
place.
cartridge, press down on
the staple box cover to
lock the cartridge in
place.
6
Remove the tape from the staple cartridge
by pulling it straight.
by pulling it straight.
7
Insert the staple box.
Push the staple box in
until it clicks into place.
until it clicks into place.
8
Push the stapler section back into the
finisher.
finisher.
9
Close the front cover.
NOTE
If staples remain,the staple cartridge cannot be
removed.
removed.
NOTES
● Do not remove the tape from the cartridge before
● Do not remove the tape from the cartridge before
inserting the staple cartridge into the box.
● When reinstalling the staple box, push it in until it
clicks into place.
NOTE
Make a test print or copy in the staple sort mode to
ensure that stapling is performed properly.
ensure that stapling is performed properly.
00-08.book 7 ページ ２００２年１１月８日 金曜日 午前９時３９分