Roland RT-10S ユーザーズマニュアル

 

•

Set up your drums, making sure that any trigger-mounted drum is NOT in contact with another 
drum or stand. Vibrations transmitted from such direct contact can cause unwanted triggering.

•

Make sure the snare drum is secure in its stand.

•

Muffling (muting) of the drums can help reduce excess vibrations of the drum trigger, which will 
improve triggering accuracy. 
We recommend using a conventional bass drum mute or blanket pressing against the head. For 
the snare drum, use a ring muffler with the area where the sensor touches the head cut out as 
shown in the diagram below.

•

Correct setting of the percussion sound module’s trigger parameters will ensure the best dynamic 
response.

•

Vibrations from other drums being played or drum resonance can cause sounds to be triggered 
accidently. Spacing the drums a bit farther apart, placing them on separate stands, muffling, and/
or changing the tuning can improve trigger response.
If after doing any of those suggested procedures you still have problems, re-adjust the trigger 
parameters (p. 14). 

•

Loud sounds from monitor speakers can also cause unwanted triggering. Change the angle of the 
speakers or move them further away from the drum kit. If unwanted triggering continues, re-
adjust the trigger parameters (p. 14). 

RT-10KST_e.fm 6 ページ ２００６年３月３０日　木曜日　午後１時５５分