JVC LVT1833-010B ユーザーズマニュアル

■ IMPORTANT
• Slide the remote control mode 

selector to [AUDIO].

• Pressing [AUDIO IN] displays “AUDIO IN” 

and selects the device connected to the 
[AUDIO IN] terminals. 

• Pressing [DIGITAL IN] displays “DGTL IN” 

and selects the device connected to the 
[DIGITAL IN] terminal. 

• You can also select the connected device as 

the source by repeatedly pressing 
[SOURCE] on the main unit.

• Refer to page 13. 

NOTE
• Refer also to the operation manual for the con-

nected device. 

• You can also operate your digital broadcast sat-

ellite and video cassette recorder using the 
remote control of this system. Refer to pages 58-
60. 

You can select the gain of the signal from the 
[AUDIO IN] terminals. Use the initial settings for 
normal operation. If the sound is too small or too 
loud, change the settings. 

• “AUDIO IN” appears in the display window. 

• “LEVEL 1” or “LEVEL 2” appears in the dis-

play window.

• Each time you press [ENTER], the display 

toggles between “LEVEL 1” and “LEVEL 2”. 

• The signal gain in “LEVEL 1” is lower than 

that in “LEVEL 2”. 

• The display returns to “AUDIO IN” in approx-

imately 5 seconds.

Remote control 

mode selector

NX-F3_NX-F7[US]-06.fm  Page 19  Wednesday, April 2, 2008  4:28 PM