JVC SP-WS3 ユーザーズマニュアル

ページ / 44
20
Advanced operations
• The mark 
shows the types of discs the operation is available 
for.
IMPORTANT
Before using the remote control for the following 
operation;
1 Set the remote control mode selector to 
AUDIO.
2 Press DVD.
7
Auto Surround (AUTO SURR)
This function automatically selects the appropriate surround mode 
according to the input signals. For example, a multichannel source 
is automatically reproduced in multichannel audio.
7
Dolby Surround
Dolby Pro Logic II*
1
Dolby Pro Logic II has a developed multichannel playback format 
to decode all 2 channel sources — stereo source and Dolby 
Surround encoded source — into a 5.1 channel.
Dolby Pro Logic II has two modes — Movie mode and Music 
mode:
• Pro Logic II Movie (PL II MOVIE)
Suitable for reproduction of Dolby Surround encoded sources 
bearing the mark 
.
• Pro Logic II Music (PL II MUSIC)
Suitable for reproduction of any 2 channel stereo music sources.
Dolby Digital*
1
Used to reproduce multichannel soundtracks of the software 
encoded with Dolby Digital (
).
7
DTS Digital Surround
*
2
Used to reproduce multichannel soundtracks of the software 
encoded with DTS Digital Surround (
).
DTS Digital Surround (DTS) is another discrete multichannel 
digital audio format available on CD and DVD software.
The buttons described below are used on pages 20 to 30.
Cursor
(3/2/Y/5)/
ENTER
Number buttons
(play button)
Remote control 
mode selector
Available Surround modes for each input signal
The 
B marks show available surround modes.
  
Mode Surround 
off
Auto 
Surround
Dolby Surround
DTS Digital 
Surround
DSP
Signal
SURR 
OFF
AUTO 
SURR
PL II 
MOVIE
*
3
PL II 
MUSIC
*
3
Dolby 
Digital
DTS
ALL CH 
ST.
*
3
Dolby Digital
(Multichannel)
B
B
B
Dolby Digital
(2 channel)
B
B
B
B
B
DTS Digital 
Surround
(Multichannel)
B
B
B
DTS Digital 
Surround
(2 channel)
B
B
B
B
B
Packed PCM 
(Multichannel)
B
B
Packed PCM 
(2 channel)
B
B
B
B
B
Analog (VCR) or 
Linear PCM
B
B
B
B
B
Continued on next page
*1
Manufactured under license from 
Dolby Laboratories. “Dolby”, 
“Pro Logic”, “MLP Lossless”, 
and the double-D symbol are 
trademarks of Dolby 
Laboratories.
*2
“DTS” and “DTS Digital 
Surround” are registered 
trademarks of Digital Theater 
Systems, Inc.
*3
You can select these modes by 
pressing SURR. (See page 21.)
AUDIO
Using the surround mode
THS3-EN.book  Page 20  Tuesday, February 24, 2004  8:35 PM