ZyXEL Communications SHD1110 ユーザーズマニュアル

Z-Wave Series Programming Guide

H A P T E R

SHD2110/3110 Programming

4.1 Basic Command Class / Binary Switch Command Class

The SHD2110/3110 responds to BASIC and BINARY commands of the Z-Wave system.

4.1.1 BASIC_GET / BINARY_SWITCH_GET

When receiving the following commands from a Z-Wave Controller, the SHD2110/3110 will report
back its On/Off status:

4.1.2 BASIC_SET / SWITCH_BINARY_SET

When receiving the following commands from a Z-Wave Controller, the appliance(s) connected to
the SHD2110/3110 will turn on or off:

Basic Get Command

[Command Class Basic, Basic Get]

Basic Report Command

Report OFF: [Command Class Basic, Basic Report, Value = 0(0x00)]

Report ON:[Command Class Basic, Basic Report, Value = (255)0xFF]

Binary Switch Get Command

[Command Class Switch Binary, Switch Binary Get]

Binary Switch Report Command

Report OFF:[Command Class Switch Binary, Switch Binary Report, Value

=0(0x00)]

Report ON:[Command Class Switch Binary, Switch Binary Report, Value =

(255)0xFF]

[Command Class Basic, Basic Set, Value = (255)0xFF]: the load attached to the

Module turns on.

[Command Class Basic, Basic Set, Value = 0(0x00)]: the load attached to the

Module turns off.