Fujifilm 16421452 ユーザーズマニュアル
114
The Vertical Battery Grip
Attaching the VG-XT1
Attaching the VG-XT1
The VG-XT1 attaches as shown below.
The VG-XT1 attaches as shown below.
1
Remove the vertical battery grip connector
cover from the camera and place it in the grip
connector cover compartment.
connector cover compartment.
2
Align the connectors on the grip with the
matching connectors on the camera.
3
Rotate the lock screw knob to tighten the lock
screw.
Inserting a Battery
Inserting a Battery
Insert a battery as shown below.
Insert a battery as shown below.
1
Unlatch and open the bat-
tery-chamber cover.
2
Insert the battery.
3
Close and latch the battery-
chamber cover.
Q The battery in the grip is used before the battery in
the camera. The camera automatically switches to
the camera battery when the battery in the grip is
exhausted. Movie recording and bulb photography
will end when the camera switches batteries. When
the battery in the grip is exhausted, remove and
charge the battery or replace it with a fully-charged
spare battery.
the camera battery when the battery in the grip is
exhausted. Movie recording and bulb photography
will end when the camera switches batteries. When
the battery in the grip is exhausted, remove and
charge the battery or replace it with a fully-charged
spare battery.
R The camera shows the levels of
both batteries, with the camera
battery level listed fi rst.
battery level listed fi rst.
P
AC Power Adapters
AC Power Adapters
The grip can be used with an optional AC-9V AC
power adapter and CP-W126 DC coupler.
power adapter and CP-W126 DC coupler.