JVC GY-HMQ10E ユーザーズマニュアル

The audio unit (with handle) is not attached to the camera recorder

unit when purchased.

Attach the audio unit according to the following procedure.

Attach the audio unit by sliding it all the way

into the shoe on the top of the camera recorder.

Turn the screw on the audio unit clockwise to

fasten it fully and securely to the camera

recorder.

0

If the audio unit is not fully and securely tightened, it will be

loose and may drop off from the camera recorder during

use.

Connect the audio unit cable to the [AUDIO IN]

terminal of the camera recorder.

.

MIC

[AUDIO IN] terminal

Open the cover

Shoe

Screw

Clamp

Cable

0

The cable of the audio unit cannot be fastened using a clamp.

The clamp is intended for fastening the microphone cable.

0

For details on mounting an external microphone and its settings,

refer to “Attaching an External Microphone”.

You can attach a microphone (optional) to the microphone holder.

Turn the knob on the microphone holder

anticlockwise to loosen and open the

microphone holder.

Place the microphone in the microphone

holder.

Turn the knob on the microphone holder

clockwise to secure the microphone.

Connect the microphone to the [INPUT1] or

[INPUT2] (XLR) terminal according to the type

of microphone cable terminal you are using.

Attach the microphone cable to the clamp.

Specify the audio input settings correctly.

0

.

AUDIO I

MIC

N

OPEN

Clamp

[INPUT1/INPUT2] 
Terminal

Microphone 
Holder

Microphone (Optional)

Knob