JVC GY-HMQ10E ユーザーズマニュアル

Applicable to: Full Auto shooting mode A, Manual shooting mode
M
Generally, the brightness of the subject that is being shot is

automatically adjusted according to the reference values of the

camera. However, the brighter or darker areas of an image may

appear unclear depending on the shooting conditions. To prevent

this from occurring, you can correct the exposure manually.

Set to the Manual Exposure mode.

0

Press the [AE ±] button on the recorder unit.

0

The AE value appears on the screen, and the adjustment

mode is enabled.

.

AE Value

Adjust the exposure.

0

Operate with the [ADJ.] knob on the recorder unit.

0

Turn upward to increase the value and make the image

brighter.

0

Turn downward to decrease the value and make the image

darker.

Confirm the setting value.

0

Press the [SET] button on the recorder unit.

0

The manual setting value is set.

(The setting value (-6 to +6) is displayed on the screen.)

.

FULL  AUTO

DOOR LOCK

A E

SET

GAIN

ADJ.

IRIS

WHT. BAL

SHUTTER

A F
M F

L-

M-

H-

B -

A -

PRST

[ADJ.] Knob

[SET] Button

[AE ±] Button

o

Press the [AE ±] button several times until the

AE value display disappears.

Applicable to: Manual shooting mode M
You can select the gain of the video amplifier using the [GAIN]

switch on the camera recorder. The default positions of the switch

are as follows.
The light sensitivity can be electrically boosted using the [GAIN]

switch when there is insufficient illumination on the object. (3

positions)

L

0 dB (No boosting is applied.)

M

9 dB (Boosts sensitivity by about 3 times.)

H

18 dB (Boosts sensitivity by about 8 times.)

.

Gain Value

.

FULL  AUTO

DOOR LOCK

A E

SET

GAIN

ADJ.

IRIS

WHT. BAL

SHUTTER

A F
M F

L-

M-

H-

B -

A -

PRST

[GAIN] Switch

0

The gain value of each position can be set to “GAIN L”/“GAIN M”

/“GAIN H” in the recording menu within the range of “0dB” to

“18dB” (in increments of 3 dB), as well as to “AGC” or “AUTO

0

Boosting the sensitivity causes the screen to appear grainier.

Set the camera recorder to the Full Auto shooting mode to activate

the Auto Gain Control mode. The gain of the video amplifier is

automatically set according to the brightness of the object.

(Selecting “AUTO SLOW-SHUTTER” switches to slow shutter,

while selecting any setting other than “AUTO SLOW-SHUTTER”

switches to “AGC”.)