Panasonic KX-TCD535HK ユーザーズマニュアル
64
SMS Feature (Text Message)
Setting the PBX Line Access Number
This feature is only for the phones connected to a PBX. This allows you to delete
automatically the PBX line access number (max. 4 digits) when you enter the destination
phone number of an SMS outgoing message from Handset Phonebook, Redial or Caller
ID lists.
To exit the operation, press
automatically the PBX line access number (max. 4 digits) when you enter the destination
phone number of an SMS outgoing message from Handset Phonebook, Redial or Caller
ID lists.
To exit the operation, press
at any time.
• The factory preset is no entry of line access number.
Turning the SMS Feature ON/OFF
To exit the operation, press
at any time.
• The factory preset is “On”.
Follow steps 1 to 3 on the previous page, then:
4
Enter 4-digit Base Unit
PIN.
(Factory Preset 0000)
PIN.
(Factory Preset 0000)
5
Select “PBX Prefix”.
6
Select “On”.
7
Enter Line Access
Number.
(max. 4 digits)
Number.
(max. 4 digits)
8
Press JOYSTICK.
9
Select “Save”, then
“Saved” is displayed.
“Saved” is displayed.
Follow steps 1 to 3 on the previous page, then:
4
Enter 4-digit Base Unit
PIN.
(Factory Preset 0000)
PIN.
(Factory Preset 0000)
5
Select “SMS On/Off”.
6
Select “On” or “Off”.
When the SMS feature is turned off;
•
If you send a message, a tone sounds and the message will return to the SMS incoming
list with “
list with “
FD
” attached.
•
If you receive from SMS centre call, the message will not be received but SMS centre
phone number will remain in the Caller ID list.
phone number will remain in the Caller ID list.
535HK.book 64 ページ ２００３年９月２２日 月曜日 午前９時１７分