Sony DCR-TRV75 ユーザーガイド

You can use either A/V connecting cable or i.LINK cable. Connect the devices as
illustrated on page 87.
When connecting with the A/V connecting cable, set DISPLAY in 

 to LCD in the

menu settings. (The default setting is LCD.)

The POWER switch should be set to 

.

(1) Play back the recorded tape on the VCR, or turn the TV on to see a desired

program.
The image of the other equipment is displayed on the LCD screen or in the
viewfinder.

(2) Press START/STOP at the scene where you want to start recording from.

Note
In the following instances, recording may stop in the middle, or distorted images may
be recorded:
– If the tape has a blank portion
– If recording from a tape in a poor condition, such as one that has been reused often for

recording

– If the input signal is cut off