TEAC AQ-VU プリント

Corporate and product names are the respective trademarks or registered trademarks of the companies mentioned. Features and specifications are subject to change without notice. Precaution : To ensure safe handling and operation, read the Instruction Manual before use.

Information Products Division

1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan

Phone : +81-42-356-9161

FAX : +81-42-356-9185

URL : http://www.teac.co.jp/

PRINTED IN JAPAN 1008 1 NH BSC-029B

17 200 17

5.5 60 205

VISUAL DATA RECORDER

AQ-VU

Unit : mm

POWER LED

LCD Display

LAN Connector

VIDEO OUT Connector

ANALOG IN/OUT Connector

CAMERA IN Connector

SYNC IN Connector

POWER Switch

DC IN Connector

MONITOR Key

REC Key

REV Key

ENTER Key

Key

PAUSE Key

FWD Key

MENU Key

STOP Key

CAMERA POWER Connector

Video input

Input signal

NTSC ( Composite video 75ohm 1Vp-p )

function

Max Field rate

60 fields per second

Number of cameras

Up to 4 cameras, Auto-skip absence channel.

When active cameras are 3 channels, ch-1 is recorded twice.

1ch -> 2ch -> 1ch -> 3ch

Indication

Video viewing

4 channels per screen or full screen viewing ( selected channels)

function

Waveform/Bar meter

4 Selectable waveform or bar meter (overlay)

Character display

Date and time : Current time, Record Y/M/D H:M:S

Operation display : Operation status

Channel number : Display/non-Display selectable (All channels)

Recording

Start operation

Push REC button for REC standby, push FWD button to start recording

mode

Trigger function record

External signal (START/STOP)

Stop operation

Manual (Press STOP button)

Trigger mode

External control (Start/Stop signal)

Hard disk mode

OVERWRITE : Endless record by overwriting older video

ONE WAY : Record stops on hard disk full

Record resumes on replacing or initializing hard disk

Playback

Playback operation

Normal playback, Reverse playback, Still image playback,

Skip playback, Block jump, Fast playback (x2, x4, x8),

Fast reverse playback (x2, x4, x8), Slow playback (1/2, 1/4, 1/8),

Slow reverse playback (1/2, 1/4, 1/8)

Time search : Search by record date and time

Event search : Search from event start date time list

ID search : Search from recording start point list

Event

Event list

Stores latest 1000 events (event start date and time)

For events with duplicated time, the first event is stored.

Main unit settings

Time correction, 30 seconds correction, Communication

Record settings

Hard disk mode, Analog input ON/OFF, Hard disk initialization, etc

Monitor settings

Character (date and time) / Bar graph selectable

External

Pre-trigger

Set the recording time prior to the recording start condition as

level trigger

mentioned above. Setting zero seconds is equivalent to no

function

(with not-delete) pre-trigger function

Level trigger

Set the level trigger threshold of designated channel.

When the analog input signal exceeds the threshold level,

the recording starts.

Record start

Analog level

Choice one of 1Channel to 4Channel.

condition

A trigger direction against the threshold level. UP(default) / DOWN

Set the level trigger threshold [example : +50% ]

The recording time prior to the recording start condition [0 to 999 sec]

External trigger

When the START/STOP signal at the SYNC IN connector on the

rear panel is changed from L level to H level, the recording stops.

Manual operation

It is started with an operation button

Others

Internal clock

Correction : Manual entry in Monitor screen, or 30 seconds

auto correction

Function specifications

Video specifications

Data specifications

Others

Operating environment

Safety/Electromagnetic Radiation

Current / Power consumption

Power Supply

Dimension ( W x H x D )

Weight

Standard accessories

Video input

4ch, BNC NTSC VBS 1.0 Vp-p 75 ohm

Video output

1ch, BNC NTSC VBS 1.0Vp-p +/-1.0% 75 ohm

Picture data

Quantization frequency/bit : 13.5MHz/8bit

handling

Video compression : Motion JPEG (Original)

Channels and

Video interval

Input

4ch Sampling Frequencies 2kHz fix

Input ranges

+/-1, +/-2, +/-5V

Output

4ch

Output ranges

+/-2V fix

Quantization bit rate

16bit (LSB 1 bit is used as identification sign)

Sampling method

Successive approximation type / Multiplexer type

Sync accuracy

+/-1 frame (in one video channel mode)

Sync signal

Start/Stop signal input :

Starts on Low, stops on Hi (polarity reversible)

Duration : 100mS or more. Repeat duration: 600mS or more

Sampling clock signal input : Sampling clock of measuring data (200 kHz or less)

Alarm signal output : Indicates malfunctions of this unit

Event signal input :

Negative logic pulse or make-contact, +5V pull-up (10k ohm) Stores event on Lo

Serial interface signal : TTL input / output

Ethernet

TCP/IP 100Base-TX

Recording media

2.5" removable HDD, using removable type package

Capacity : 40GB

Exchanging operation :

Exchange after stopping REC or PLAY, then shutting down the power.

Recording time : Approx. 5 hours / Approx. 10 hours (HDD:80GB)

Initialization : Quick (instant), Full (several hours with 40GB HDD)

Internal clock accuracy less than 60 seconds per month (ambient temperature 25 degC, at operation)

Temperature

Temperature / Humidity (operating) : 0 to 35 degC / 10 to 80%RH

Temperature(non-operating) : -20 to 60 degC non-condensing

Always remove the HDD pack out of the main body at the time of the

transportation by all means.

Comply with Electrical Appliance and Material Safety Law Conform to VCCI Class A

Approx. 2A / 24W (excluding a supply power to the camera on 12V operation)

10 to 17V DC , 100 to 240V AC 50/60Hz (when using an adapter)

Approx. 200 x 60 x 205 mm , 7 7/8" x 2 3/8" x 8 1/16" (excluding protruding Parts)

Approx. 2.3kg/5.07lb (Including 40GB HDD pack)

Manual, Veiw Softwarer ( CD-ROM ), HDD Pack ( 40GB ), USB cable, BNC cable, AC adapter

Units specifications

CHs

Pixels

Recording interval (fields/sec)

720 x 240

30/15

720 x 240

360 x 120

OPTION

LX-100 series sync. kit

Contents of Kit

Cable

LX View Basic Software

㧔PL-S1100)

LX View Sync. Option Software

Network Monitoring AQ-Net (

PL-S1100 )

Adapter cable for camera power supply (Approx. 10cm) CL-AQ-CPWR

BNC conversion cable (1.5m) CL-AQ-BNC

HDD Pack (40GB) PH-AQ-40

HDD Pack (80GB) PH-AQ-80

HDD Pack

AQ-VU

Visual Data Recorder

Synchronous 4 channels
video and data recording

http://www.teac.co.jp/

By connecting with LX-100 series data recorder,

as much as 32 channels of data can be

synchronously recorded.

32 channels synchronized recording

[ Product line ]

Extended recording at an unattended automatic product line

[ Architecture ]

Building skew and bridge shake

[ Vehicle performance test ] Vibration data with synchronous video

on high-speed driving test

[Bio-measurement] Driver's bio-measurement with synchronous video

[ Product line ]

Monitor to find a product line problem

and record vibration outbreak

[Support Service ] Temporary measurement and monitor of manufacturing

support service

[ Elevators ]

Monitor elevator malfunction

[ Factory ]

Periodic maintenance of plant equipment

and temporarily monitor faulty point

[ Machinery ]

Environmental tests of machinery

for deterioration, quake resistance, weather change

[ Product line ]

Production line safety check

[ University / Research organization ]

It is used in a wide field

AQ-VU is a visual data recorder with 4 channels video and analog

signals that can be synchronously recorded and played back. Video

and data can be verified or played-back without a PC using a LCD

monitor and stand-alone AQ-VU. AQ-VU is a remarkable data

recorder that can visually confirm a physical event without

connecting to a PC.

The video and analog data is easy to verify
using the built-in LCD monitor. Visual Data
Recorder AQ-VU is a unification of a visual
and data measurement.

High-speed driving test

Vehicle and rail safety test
and driving test

Product line

Equipment maintenance
such as elevators

Temporary monitor of plumbing
and pump pressure such as
in air conditioning repair

Factory/Plant equipment