Mitsubishi Electronics DX-TL16U ユーザーズマニュアル
User’s Manual
44
Storage Screen (STATUS
Storage Tab)
Figure 38
─ Storage screen.
The Storage screen displays the Disk Bad, Temperature and S.M.A.R.T. information of the storage device.
Disk Bad ─ Displays the damage status of the storage drive. (Not Formatted (The device is not formatted),
Good (%) (The device is working properly though some portion (%) of the storage is damaged.) or Bad
(More than 90% of the storage is damaged.))
(More than 90% of the storage is damaged.))
Temperature ─ Displays the temperature of the storage drive. (N/A (The DVR cannot read the temperature.),
Good (The temperature is normal.) or Bad (The temperature is 70
o
C (158
o
F) or higher.))
S.M.A.R.T. ─ Displays S.M.A.R.T. information of the storage. (Good (The storage condition is normal.),
Bad (Data cannot be written on or read from the storage drive.) or N/A (The S.M.A.R.T. monitoring is
not working or supported.))
not working or supported.))
NOTE: When the S.M.A.R.T. displays Bad, the screen displays a message box. Once the “Bad”
message displays, replacing the hard disk drive is recommended, usually within 24 hours.
message displays, replacing the hard disk drive is recommended, usually within 24 hours.
NOTE: Temperature and S.M.A.R.T. information will be available only for internal hard disk drives
supporting the SMART (Self-Monitoring Analysis and Reporting Technology) monitoring program.
supporting the SMART (Self-Monitoring Analysis and Reporting Technology) monitoring program.