Mitsubishi Electronics DX-TL16U ユーザーズマニュアル

Digital Video Recorder 

 61

 
 
Pressing and holding the 

Clip Copy

 button for more than three seconds while in the Live monitoring mode, 

and the Clip-Copy screen appears to allow clip copy setup.  

 

Pressing the 

Clip Copy

 button during playback will set the starting point of the video to be clip copied, and 

the   icon displays at the bottom-left corner of the screen.  Pressing the 

Clip Copy

 button again will set the 

ending point of the video to be clip copied by displaying the Clip-Copy screen. 

 

Pressing and holding the 

Clip Copy

 button for more than three seconds while in the Playback mode or live 

monitoring mode initiates the One-Touch Clip Copy function.  The last recorded image will be the ending 
point of video to be clip copied, and the system will automatically begin to calculate the possible video data 
size that the selected storage media can handle. 
 

 

 

Figure 46 

─ Clip-Copy screen. 

 
You can search video from the first to last recorded images, or you can set the start and stop times and dates. 

 

Highlight the box beside From and press the 

 (Play/Pause) button to toggle between On and Off.  When 

set to Off, you can enter a specific Date and Time.  When set to On, the search will be from the first recorded 
image. 

 

Highlight the box beside To and press the 

 button to toggle between On and Off.  When set to Off, you 

can enter a specific Date and Time.  When set to On, the search will be from the last recorded image. 

 

Highlight the box beside Channels and press the 

 button.  You can select the cameras that you would 

like to include in your video clip. 

 

Highlight the box beside Password and press the 

 button.  A virtual keyboard appears allowing you to 

enter the password for reviewing the video clips. 

 

Highlight the box beside Dest. and press the 

 button.  You can select the storage device on which you 

would like to record the video clip.  You can choose from Internal CD-RW, Internal DVD RW, USB 
Storage and USB CD-RW. 

 

 

 

NOTE:  When the error message “Firmware update of the optical drive is required” displays, update 
the firmware of the installed CD-RW drive or DVD RW drive.  Please follow the instructions described 
in Chapter 3 – Configuration – System Information section. 

 

The DVR automatically assigns a file name to the video clip.  However, you can give the video clip file a 
different name.  Highlight the box beside File Name and press the 

 button.  A virtual keyboard appears.  

Enter a file name for the video you are backing up and select Close.