Cornelius UC 701 ユーザーズマニュアル
IMPORTANT:
TO THE INSTALLER.
It is the responsibility of
the Installer to ensure that
the water supply to the
dispensing equipment is
provided with protection
against backflow by an air
gap as defined in
ANSI/ASME A112.1.2-1979;
or an approved vacuum
breaker or other such
method as proved effective
by test.
It is the responsibility of
the Installer to ensure that
the water supply to the
dispensing equipment is
provided with protection
against backflow by an air
gap as defined in
ANSI/ASME A112.1.2-1979;
or an approved vacuum
breaker or other such
method as proved effective
by test.
Water pipe connections
and fixtures directly
connected to a potable
water supply shall be
sized, installed, and
maintained according to
Federal, State, and Local
Codes.
and fixtures directly
connected to a potable
water supply shall be
sized, installed, and
maintained according to
Federal, State, and Local
Codes.
Installation/Service Manual
UC 701 SERIES CONTINUOUS–FLOW
ICEMAKER
UC 701 SERIES CONTINUOUS–FLOW
ICEMAKER
PRINTED IN U.S.A
IMI CORNELIUS INC; 2000–2003
IMI CORNELIUS INC
g
One Cornelius Place
g
Anoka, MN 55303-6234
Telephone (800) 238-3600 Facsimile (800) 535-4231
Part No. 630460150
February 2001
Revision Date: November 7, 2003
Revision A
February 2001
Revision Date: November 7, 2003
Revision A
THIS DOCUMENT CONTAINS IMPORTANT INFORMATION
This Manual must be read and understood before installing or operating this equipment
This Manual must be read and understood before installing or operating this equipment