Chariot Carriers Chariot Baby Seat ユーザーズマニュアル

First connect the fastex buckles 
on the underside of the baby 
seat with their counterparts on 
the lap belt ends. 
For side-fitting, use the belt 
ends of the lap belt of the side 
in question. 
For fitting in the centre, use the 
central belt ends of both lap 
belts. 

Correct positioning of the baby 
seat.

Experience has shown that it helps if more or less the following 
overall belt length adjustment is made (measured from the point of 
attachment to the baby seat to the point of attachment to the trailer 
seat):
On the Comfort model - approximately 12 cm
On the Cabriolet and Cheetah2 models - 15 to 16 cm

Now lay both straps that are at the front end of the baby seat 
around the fitted telescopic tube, thread the ends through the 
fasteners, as in the top right hand picture, and pull the straps tight.

The next step is to connect the safety belts in the trailer with the baby seat:

Insert the trailer seat crotch 
harness from the rear through 
the slot in the baby seat in front 
of the flap for the padding.

Insert the ring through the 
elastic loop at the end of the 
flap for the padding.

For side fitting, the crotch 
harness of the seat part of the 
relevant side can be used.
For centre-fitting, there is an 
additional crotch harness in the 
centre of the trailer seat.

Illustration A