Viking Access Systems f1 gate ユーザーズマニュアル

VIKING TECHNICAL SUPPORT 1.800.908.0884

NOTE: 

Installing a shunt or jumper on the pins will activate the feature.

“Fail Safe/Secure”

During complete power 
failure, including battery 
power; determines the force 
required to manually move 
the gate.
• Fail Safe Mode:

By removing the wire-
jumper plug from the “Fail 
Safe/Secure” connector:
The gate can move 
manually with a relatively 
low amount of force.

By inserting the wire-
jumper plug into the “Fail 
Safe/Secure” connector:
The gate will not move 
manually.

!

 

IMPORTANT:

 

Regardless of the power failure options chosen, the gate can be moved 

manually with a relatively low amount of force by following the steps for “Manual 
Release” as outlined at on page 11.

“Sync” 

Used only in conjunction with 

the Viking Barrier gate operator model 
B-12. Activating this feature allows for 
synchronized operation with the B-12 
operator. See page 35.

“Auto Open” - Power Failure Option

Opens the gate automatically during 
power failure. Resumes normal operation 
when power is restored.

“Pre-Warning”

 Initiates two options for 

an audio or visual warning 3 seconds 
prior to gate motion and will continue:

1.  Until gate reaches closed limit: 

“Magnetic Lock” terminals provide a 
contact between “COM” and “N.O”.

2. Until gate reaches either limit:  

“AUX. PWR” terminals provide 24VDC.

“EXT” 

Available for future developments.

“Last Open” - Power Failure Option

Opens the gate automatically when the 
battery backup voltage is critically low.