Mitsubishi Electronics XD8600 ユーザーズマニュアル

EN-59

One of the special features of this projector is the 
picture-in-picture (PinP) mode. The PinP mode allows 
you to view the images from different sources at the 
same time. 
•  While viewing the image from the COMPUTER1,

COMPUTER2, DVI, or HDMI input source, you can 
display the image from the VIDEO or S-VIDEO input 
source as a sub image.

Sub image

To use the PinP mode
1.  Press the PinP button on the remote control. 
2.  If necessary, select the desired external input 

source of the sub image by using the VIDEO or 
S-VIDEO button on the remote control.

3.  Press the PinP button again to exit the PinP mode.
To change the position of the sub image:
Press the  or  button on the remote control.
Important:
•  The PinP mode is available only when the ASPECT

ratio is set to NORMAL. 

•  The PinP mode isn’t available with some input 

signals. For further information, see page 75. 

•  When the main image signal is lost during the PinP

mode, the PinP mode is disabled. 

•  When the COMPUTER 1, COMPUTER 2, DVI-D 

(HDCP) or HDMI button on the remote control is 
pressed, the PinP mode will be canceled. 

•  When there is no video signal for sub image, you

can’t change the display position.

•  The motion may not run smoothly in the PinP 

mode.

•  You cannot make the MULTI-SCREEN menu

settings and SIGNAL menu settings in the PinP 
mode. 

•  The size of the sub image varies depending on the

input signal and the settings.

By pressing the MAGNIFY button on the remote 
control, you can magnify the image to view the details.
•  While viewing the image from the COMPUTER1,

COMPUTER2, DVI, or HDMI input source, you can 
magnify the image.

Magnified image

To use the MAGNIFY mode:
1.  Press the MAGNIFY button on the remote control. 

•  You can select the area to be magnified by 

pressing the , ,  or  button on the 
remote control.

•  You can change the magnification of the 

selected area by pressing the + or - button.

2.  Press the MAGNIFY button again to exit the 

MAGNIFY mode.
•  The regular operation screen will appear.

Important:
•  The MAGNIFY mode doesn’t function with some 

input signals. For details, see page 75.

•  In the MAGNIFY mode, you can’t display the MULTI-

SCREEN menu and the SIGNAL menu.

To stop the motion in the image temporarily (or to 
display a still image):
Press the FREEZE button on the remote control.
•  The image will freeze temporarily.
To resume the motion in the image:
Press the FREEZE button on the remote control again.
Important:
•  Do not display a still picture for a long time

because the afterimages may persist on the screen.