Mitsubishi Electronics C64T ユーザーズマニュアル

 

16 

 

1017 

(PR) 

rot Rotational 

axis 

Specify whether the axis is a rotary axis or linear axis.  
For the rotary axis‚ the position display will be 360 
degrees‚ and the axis will return to 0 degrees. 
If the position display is to be continuously displayed 
even with the rotary axis‚ set the axis as a linear axis 

0:  Linear axis 
1:  Rotary axis 

1018 

(PR) 

ccw 

Motor CCW 

Specify the direction of the motor rotation to the 
command direction. 

0:  Rotates clockwise (looking from motor shaft) with 

the forward rotation command. 

1:  Rotates counterclockwise (looking from motor 

shaft) with the forward rotation command. 

0: Rotates 

clockwise  

1: Rotates 

counter- 
clockwise 

1019 

(PR) 

dia Diameter 

specification 
axis 

Specify whether the program movement amount is to 
be commanded with the diameter dimension or as 
movement amount. 
When the movement amount is commanded with the 
diameter dimensions‚ 5mm will be moved when the 
command is a movement distance of 10mm. 
The movement amount per pulse will also be halved 
during manual pulse feed. 
Among parameters concerning length‚ the tool length‚ 
the wear compensation amount and the workpiece 
coordinate offset are displayed in diameter value when 
diameter is specified‚ but other parameters are always 
displayed in radius value. 

0: Command 

with 

movement 
amount 

1: Command 

with 

diameter 
dimension 

1020 

(PR) 

sp_ax Spindle 

Interpolation 

Specify 1 when the NC control axis is used as the 
spindle. 

0:  The NC control 

axis is used as 
the servo axis.

1:  The NC control 

axis is used as 
the spindle.