Combi 9850 ユーザーズマニュアル
- 3 -
Opening/Storing the High Chair
Opening
1. Pull up the left and right height
1. Pull up the left and right height
adjustment levers and then lift the main
body up.
body up.
2. Release your fingers from the left and
right lever when the desired height is
fixed. At this time, check to see that
the left and right height adjustment
indications are in matching positions
before using.
fixed. At this time, check to see that
the left and right height adjustment
indications are in matching positions
before using.
Storing
Pull up the left and right height
Pull up the left and right height
adjustment levers and pull main body up
slightly to unlock, then slowly lower the
high chair.
slightly to unlock, then slowly lower the
high chair.
Attaching/Removing the Seat Cushion
CAUTION
Do not use a seat cushion
that is ripped or torn.
that is ripped or torn.
Always use the high chair
with the cushion attached.
Failure to do so may injure
your child.
with the cushion attached.
Failure to do so may injure
your child.
Attaching/Removing the Tray
CAUTION
Before using, check to see
that the tray is locked into
the position you set.
that the tray is locked into
the position you set.
Pay attention so that the
child’s fingers are not in the
guide on the side of the main
unit to avoid injury.
child’s fingers are not in the
guide on the side of the main
unit to avoid injury.
Removing the Seat Cushion
1. Unbuckle the 5-point harness and pull the
1. Unbuckle the 5-point harness and pull the
straps out from seat cushion.
2. Grasp the seat cushion and carefully remove.
Removing the tray
Locate the tray release lever and pull off.
Locate the tray release lever and pull off.
Attaching the Seat Cushion
1. Pass the 5-point harness straps through the
1. Pass the 5-point harness straps through the
appropriate openings in the seat cushion.
2. Shape the cushion to the seat frame and velcro
into position.
3. Loop the right and left side bands around the
hooks located behind the seat of the main unit.
Attaching the Tray
1. Insert the tray along the guides on the sides of the main unit.
2. Pull the lever located under the front of the tray and slide the
1. Insert the tray along the guides on the sides of the main unit.
2. Pull the lever located under the front of the tray and slide the
tray back until a comfortable position is found for your child.
Position the tray so that the sides are locked into matching
positions.
Position the tray so that the sides are locked into matching
positions.
CAUTION
Remove child before adjusting heights.