Mitsubishi Electronics A1SD75M1/M2/M3 ユーザーズマニュアル

9 - 5                                                                                                                                                       9 - 5

MELSOFT

9. SETTING OF POSITIONING DATA AND START BLOCK DATA

Item

Description

Positioning data

In the check box, set the positioning data of the axis on which error check will be made.

Start block data

In the check box, set the start block data of the axis on which error check will be made.

Parameter

In the check box, set the parameters of the axis on which error check will be made.

Servo parameter

In the check box, set the servo parameters of the axis on which error check will be made.

Displayed only when AD75M# is selected in Change AD75 model.

“OK” button

Click this button to start error check.

Error check result

When error check is complete, the number of errors and error locations appear.

On the above screen, error locations are the command speed of axis #1 positioning data No.

1 and the parameter at point No. 1 of axis #2 start block No. 0.