Denon DN-S1200 ユーザーズマニュアル



(27)  Version No:The DN-S1200’s software version is displayed. (SYSTEM / DSP)
(28)  Touch Int.:The Adjust the Scratch disc.

1)  Press the 

 knob and select “Touch Int”.

   “Cancel” flashes on the character display.
2)  Turn the 

 knob to display “OK”.

3) Press the 

 button.

   “Touch Initial!” is displayed once initialization is completed.
4)  Once clearing is completed, “Completed!” is displayed.

(29)  Preset Int:Set all the preset data back to the factory defaults.

1)  To clear the PRESET data, push the 

 button. “Preset Int?” flashes on the character 

display.

2)  Push the 

 button again. “Preset Initial!” is displayed on the character display while 

data clearing.

3)  Once clearing is completed, “Complete!” is displayed.

The files that can be played using an external USB memory device are as shown below.

• Depending on the type of MP3 encoding software, with some files noise may be generated or it may not 

be possible to play the file.

• Recordings  you  make  are  for  your  personal  use  and  should  not  be  used  in  ways  infringing  upon  the 

copyright holder as per copyright laws.

• With MP3 files, the files cannot be played if the pitch is 24% or greater.

MP3 Format

MPEG-1

Audio Layer-3 40-320kbps f/s 44.1kHz, ,STEREO

ID-3 Tag

V1.0, V1.1, V2.2, V2.3, V2.4 
(ASCII + ISO8859-1(West European))

Encording

C.B.R, V.B.R.

WAV Format

PCM

16bit f/s 44.1kHz

Metadata Tag

Supported  by  Denon  DJ  Music  Manager,  Audio  Grabber, 
Dragon Tagger

.m3u and .xml playlists are supported only through DENON DJ Music Manager.