Mitsubishi Electronics AD75M1/M2/M3 ユーザーズマニュアル
11 - 8 11 - 8
MELSOFT
11. POSITIONING DEBUGGING
11.1.4 Signal monitor
PURPOSE
Monitor the I/O signals (X/Y devices), external I/O signals and status signals of the
AD75.
For the signals, refer to the AD75 User's Manual.
AD75.
For the signals, refer to the AD75 User's Manual.
BASIC OPERATION
1. Perform the basic operation in Section 11.1.2 to display the operation monitor
main screen.
2. Click the "Signal" button on the operation monitor main screen.
3. Click the <<X/Y device>>/<<External I/O>>/<<Status info.>> tab.
4. To exit, click the "Close" button.
3. Click the <<X/Y device>>/<<External I/O>>/<<Status info.>> tab.
4. To exit, click the "Close" button.
DISPLAY/SETTING SCREEN
[X/Y device monitor]
(Screen example: Screen displayed when AD75M# is selected in Change AD75 model)
DISPLAY/SETTING DATA
Item Description
X/Y device
Displays ON of the I/O signals of the AD75.
If AD75M# is selected in Change AD75 model, Not for use is displayed at Y15.
If AD75M# is selected in Change AD75 model, Not for use is displayed at Y15.