Honeywell MS4103 ユーザーズマニュアル
104
MP958
The MP958 Pneumatic Valve
Actuator is direct-acting and used
only with Honeywell V5852A2xx,
V5862A2xx, V5853A2xx, and
V5863A2xx Terminal Unit Valves to
control hot and/or chilled water.
Actuator is direct-acting and used
only with Honeywell V5852A2xx,
V5862A2xx, V5853A2xx, and
V5863A2xx Terminal Unit Valves to
control hot and/or chilled water.
SPECIFICATIONS
Actuator Type ....................................... Valve
Actuator Type ....................................... Valve
Action ................................................... Direct Acting
Actuator Force ..................................... Low
Fail Safe Mode ..................................... Spring Return
Air Connections .................................... Barbed fitting for 1/4 in. O.D.
plastic tubing
Maximum Operating Pressure ............. 30 psi
DIMENSIONS DIAGRAM
1 1/4
(32)
2 1/4 DIA
1
1-1/4 IN. (32 MM) MINIMUM CLEARANCE TO REMOVE
ACTUATOR. 2-1/4 IN. (57 MM) MINIMUM CLEARANCE
TO FACILITATE STRAIGHT ON TUBING CONNECTION.
IF CLEARANCE IS LESS THAN 2-1/4 IN. (57 MM), USE
AN ELBOW.
1
VALVE
SIZE
A
IN. (MM)
1/2 in. NPT
3/4 in. NPT
3/4 in. NPT
3-3/16 (81)
3-1/8 (79)
3-1/8 (79)
A
C8106A
Pneumatic Valve Actuator
mP958