Zebra 105925G-002 ユーザーズマニュアル
42
Zebra P110i / P110m / P120i Card Printers Service Manual
980584-001 Rev. A
2.9 Loading Cards
To help you load, print, and collect cards, the printer has a Card Feeder and a Card
Output Hopper.
Output Hopper.
Card Feeder
The card feeder is used for loading cards, it can hold up to 100 cards of 30 mils thickness. The
card feeder is located under the card feeder cover
card feeder is located under the card feeder cover
of the printer.
Load cards into card feeder as follows:
Step 1.
Open card feeder cover.
Step 2.
Slide card guide all the way to the right until it locks in place with an audible click.
Caution •
DO NOT
bend cards or touch print surfaces as this can reduce print quality.
Note •
The surface of the cards must remain clean and dust free. Always store cards in
an enclosed container. Ideally, use cards as soon as possible. If cards stick together,
carefully fan or shuffle them.
carefully fan or shuffle them.
Note •
For Cards with magnetic stripe, refer to
for loading instructions.
Card Feed
Cover
Cover
Card
Guide
Guide