Zebra 105925G-002 ユーザーズマニュアル
58
Zebra P110i / P110m / P120i Card Printers Service Manual
980584-001 Rev. A
3.4 Card Movement During Printing
Step 1.
The card is fed from the Card Input Hopper and loaded into the Card Flipper where it
is rotated into the print position.
is rotated into the print position.
Step 2.
The card is moved into the Print Engine, passing the Cleaning Roller; this cleans dust
or dirt particles from the upper card surface.
or dirt particles from the upper card surface.
Step 3.
If the Printer includes an optional Magnetic Stripe Encoder, the card is moved to the
Magnetic Stripe Encoder, and the stripe is encoded.
Magnetic Stripe Encoder, and the stripe is encoded.
After the card is encoded, it is checked to verify that the magnetic stripe was
properly encoded.
properly encoded.
If encoding fails, the card is ejected into the Card Output Hopper. This is done to
avoid wasting time and ribbon panels on a defective card.
avoid wasting time and ribbon panels on a defective card.
If the encoding is successful, the card is moved into the pre-print position, just before
the Printhead.
the Printhead.
Printhead
Card Input
Hopper
Hopper
Card
Guide
Guide
Ribbon
Cartridge
Cartridge
Card
Output
Hopper
Output
Hopper
Card Flipper
(under Hopper)
(under Hopper)
Cleaning
Roller
Roller
Magnetic Stripe
Encoder (optional)
Encoder (optional)
Platen
Roller
Roller
Lid
Multi-Function
LCD Panel
LCD Panel