3com WX1200 3CRWX120695A ユーザーズマニュアル
display ap fdb
325
See Also
display ap fdb
Displays the entries in a specified MPís forwarding database.
Syntax —
display ap fdb ap-number
ap-number
— Index value that identifies the MAP on the WX.
Defaults
—
None.
Access
—
All.
History
—
Introduced in MSS Version 6.0.
Examples
—
The following command displays FDB entries for AP 7:
WX# display ap fdb 7
AP 7:
# = System Entry. $ = Authenticate Entry
VLAN
TAG
Dest MAC/Route Des [CoS]
Destination Ports
---- ---
------------------
-----
-----------------
4095 4095
00:0b:0e:00:ca:c1 # CPU
4095 0 00:0b:0e:00:04:0c
eth0
Table 55 describes the fields in the display ap fdb output.
Table 55 Output for display ap fdb
Field
Description
VLAN
VLAN number.
TAG
VLAN tag value. If the interface is untagged, the TAG field is
blank.
blank.
Dest MAC/Route Des MAC address of this forwarding entryís destination.
CoS
Type of entry. The entry types are explained in the first row
of the command output.
of the command output.
Note: This Class of Service (CoS) value is not associated with
MSS quality of service (QoS) features.
MSS quality of service (QoS) features.
Destination Ports
WX switch port associated with the entry. A switch sends
traffic to the destination MAC address through this port.
traffic to the destination MAC address through this port.