KitchenAid KFRU368T ユーザーズマニュアル

The rotisserie system is designed to cook food from the rear 
using intense, searing infrared heat.

NOTE: To avoid product damage when not using the rotisserie, 
remove motor and store indoors. Remove spit rod and forks. 
Store out of reach of children.

1. Remove warming shelf.

2. Mount rotisserie motor on the grill’s mounting bracket. 

Position it securely into support bracket slots. Plug single-
prong plug into rotisserie motor.

3. To load the spit rod, slide one of the rotisserie forks onto the 

spit rod with prongs facing inward.

4. Push spit rod through the center of the food, then slide 

second rotisserie fork into position.

5. Center the food and rotisserie forks on spit rod and tighten 

wing nuts on the rotisserie forks. If necessary, secure loose 
food portions with butcher’s string only.

6. Once the food is positioned on spit rod, place pointed end of 

rod through the hole in the left side of the grill and into the 
rotisserie motor, then lower the notched end of the spit rod 
onto the support bracket on the opposite side.

7. Check that food is centered with the rotisserie burner. If not, 

loosen wing nuts, reposition food and retighten wing nuts.

8. Plug into a grounded 3 prong outdoor.

9. Turn on the rotisserie motor and light the rotisserie burner. 

See the following “Lighting the Rotisserie Burner” section.

1. Do not lean over the grill.

2. Push in and turn the control knob to LITE/HI. You will see the 

igniter glow.

3. When the rotisserie burner lights, continue to hold the knob in 

for another 10 seconds, then release the knob and burner will 
stay lit.

IMPORTANT: If the rotisserie burner does not light immediately, 
turn the burner knob to OFF and wait 5 minutes before relighting.

1. Do not lean over the grill.

2. Remove the manual lighting extension (see following 

illustration) and attach a match to the split ring.

3. Strike the match to light it.

A

B

A

B