Furuno 1763c ユーザーズマニュアル

 

You should do the set up for the equipment through the installation menu when installation 
has been finished. To access to the installation menu, follow the steps in below. 
 
1.  Press the [POWER/BRILL] key with touch-and-release action while pressing the [MENU] 

key down. You hear a beep sound. 

2.  Release the [MENU] key when the message of “STARTING INSTALLATION MODE” 

appears. 

3.  After the radar screen appears, press the [MENU] key to show the RADAR MENU. 
4.  Press the SYSTEM CONFIGURATION soft key to show the SYSTEM CONFIG menu. 
5.  Press the INSTALLATION SETUP soft key to display the INSTALL SETUP menu. 

GENERAL SETUP

NAV OPTION

SYSTEM SETUP

INSTALLATION SETUP

RETURN

Radar menu 

System configuration menu

RADAR DISPLAY SETUP

RADAR RANGE SETUP

ARP SETUP

FUNCTION KEY SETUP

SYSTEM CONFIGURATION

NETWORK SETUP

RADAR SETUP

RETURN

NETWORK SOUNDER SETUP*

Install setup menu

*: Do not change settings in this menu

 

 
Note: The very first time the system is powered you are asked if you want to start the 

simulation mode, which provides simulated operation of the equipment. Press the 
[CLEAR] key to start normal operation for radar adjustment. For further details about 
the simulation mode, see the operator’s manual. 

START
SIMULATION MODE?
YES  ... PUSH ENTER KNOB
NO    ... PUSH CLEAR KEY
             TO SKIP.