Mercury Marine 90-830296005 ユーザーズマニュアル

PROPELLER INSTALLATION INSTRUCTIONS

Page   2 / 7  

 90-830296005    FEBRUARY  2010

3. Install the tab washer, and secure with the nut. Tighten the nut to the specified torque. Bend the tabs on the tab washer

onto the nut.

a -

Nut

b -

Tab washer

c -

Propeller

d -

Thrust washer

Description

Nm

lb‑in.

lb‑ft

6–15 hp propeller nut

11.3

100

18–25 hp propeller nut

22.6

16.7

30–60 hp propeller nut

74.6

55

4. Rotate the propeller to verify interference or binding does not exist between the gear housing and the propeller.

Flo‑Torq II Propeller Installation

1. Install and align all of the components.
2. Tighten the nut to the specified torque.
3. Bend the tabs of the tab washer into the rear thrust hub.
4. The propeller must be locked between the forward thrust washer and aft adapter. The propeller must not move on the

propeller shaft.

a -

Mercury, Mariner,

Mercury MerCruiser,

Force, Honda®

b -

Revolution 4,

Tempest Plus,

Trophy Plus, and

Bravo I

c -

Mariner, Evinrude®,

Johnson®, OMC®,

Suzuki®, Yamaha®,

Tohatsu®, Nissan®,

Volvo®, Honda®

Description

Nm

lb‑in.

lb‑ft

Propeller nut

74.6

55

5. Rotate the propeller to verify interference or binding does not exist between the gear housing and the propeller.

Flo‑Torq III and Flo‑Torq IV Propeller Installation

1. Install and align all of the components.
2. Tighten the nut to the specified torque.
3. Bend the tabs of the tab washer into the rear thrust hub.

26903

13276