ONKYO PR-SC5507 ユーザーズマニュアル

105

This section explains the items on the “Miscellaneous” menu.

Note:
This procedure can also be performed on the AV control-
ler by using its [SETUP] button, arrow buttons, and 
[ENTER] button.

Press the [RECEIVER] button followed by 
the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make sure the 
appropriate external input is selected on your TV.

q]/[w] buttons to 

select “6. Miscellaneous”, and then press 
[ENTER].
The “Miscellaneous” menu appears.

q]/[w] buttons to 

select an item, and then press [ENTER].
The screen for that item appears.

q]/[w] buttons to 

e]/[r] buttons to change it.

The items are explained below.

When you’ve finished, press the [SETUP] 
button.
The setup menu closes.

Absolute: Display range is “Min”, 0.5 through 99.5, “Max”.

Relative:  Display range is –

Q dB, –81.5 dB through +18.0 dB.

With this setting, you can choose how the volume level is displayed.
The absolute value 82 is equivalent to the relative value 0 dB.

Q dB (fully muted), –50 dB to –10 dB in 10 dB steps

This setting determines how much the output is muted when the muting function is used (page 64).

Off, 50 to 99 (Absolute display)
Off, –32 dB to +17 dB (Relative display)

With this setting, you can limit the maximum volume.
To disable this setting, select “Off”.

Last, Min, 1 to 99 or Max (Absolute display)
Last, –

Q dB, –81 dB to +18 dB (Relative display)

With this preference, you can specify the volume setting to be used each time the AV controller is turned on.
To use the same volume level that was used when the AV controller was turned off, select “Last”.
The “Power On Volume” cannot be set higher than the “Maximum Volume” setting.

With this preference, you can specify the headphone volume relative to the main volume. This is useful if 
there’s a volume difference between your speakers and your headphones.