ONKYO PR-SC5507 ユーザーズマニュアル

49

If you connect a video component to HDMI IN, you 
must assign that input to an input selector. For example, 
if you connect your DVD/BD player to HDMI IN 1, you 
must assign HDMI IN 1 to the DVD/BD input selector.
If you’ve connected your TV to the AV controller with 
an HDMI cable, you can set the AV controller so that 
composite video, S-Video, and component video sources 
are upconverted* and output by the HDMI output. You 
can set this for each input selector by selecting the 
“- - - - -” option.

Notes:
• For composite video, S-Video, and component video 

upconversion for the HDMI output, the “Monitor Out” 
setting must be set to other than “Analog” (see 
page 47), and the “HDMI Input” setting must be set to 
“- - - - -”. See page 28 for more information on video 
signal flow and upconversion.

• If no video component is connected to HDMI output 

(even if the HDMI input is assigned), the AV 
controller selects the video source based on the setting 
of Component Video Input.

• When an HDMI IN is assigned to an input selector, the 

AV controller will select audio from HDMI IN as a 
priority. See “Digital Audio Input Setup” on page 51.

• The TUNER input selector cannot be assigned and is 

fixed at the “- - - - -” option.

• If you connect an input component (such as UP-A1 

Dock that seated iPod) to the UNIVERSAL PORT 
jack, you cannot assign any input to PORT selector.

• Do not assign the component connected with the 

HDMI input to the TV/TAPE selector when you set 
“TV Control” setting to “On” (see page 109). 
Otherwise, appropriate CEC (Consumer Electronics 
Control) operation is not guaranteed.

• This procedure can also be performed on the AV 

controller by using its [SETUP] button, arrow buttons, 
and [ENTER] button.

Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make 
sure the appropriate external input is 
selected on your TV.

q]/[w] but-

tons to select “1. Input/Output 
Assign”, and then press 
[ENTER].
The “Input/Output Assign” menu 
appears.

q]/[w] but-

tons to select “2. HDMI Input”, 
and then press [ENTER].
The “HDMI Input” menu appears.

Composite video, S-Video, 

component video

Composite video, S-Video, 

component video

HDMI

HDMI

q]/[w] but-

e]/

r] buttons to select:

Select the HDMI IN to which 
the video component has 
been connected.

- - - - -: Output composite video, 

S-Video, and component 
video sources from the HDMI 
outputs. The video output sig-
nal from the HDMI outputs is 
the one configured in “Com-
ponent Video Input Setup” 
(see page 50).

• Each HDMI IN cannot be assigned to 

more than one input selector. When 
HDMI IN have already been 
assigned, you must set first any 
unused input selectors to “- - - - -” or 
you will be unable to assign HDMI 
IN to input selector.

• “AUX 1” is used only for digital 

input from the front panel terminals.

Press the [SETUP] button.
The setup menu closes.