Humminbird 700 ユーザーズマニュアル
40
Side
(WideSide® transducer: WideSide® view only)
Side sets which transducer beam from the WideSide® Transducer is shown in the WideSide®
View. A WideSide® transducer must be connected to the 700 Series™ Fishing System. The Side
menu choice is available when Transducer Select is set to WideSide® (see Sonar Menu Tab:
Transducer Select) and can only be accessed from the Sonar X-Press
View. A WideSide® transducer must be connected to the 700 Series™ Fishing System. The Side
menu choice is available when Transducer Select is set to WideSide® (see Sonar Menu Tab:
Transducer Select) and can only be accessed from the Sonar X-Press
TM
menu when you are in
WideSide® view.
NOTE: Side requires the purchase of the WideSide® transducer. You can visit our website at
www.humminbird.com to order this accessory online or contact our Customer Resource Center at
1-800-633-1468.
www.humminbird.com to order this accessory online or contact our Customer Resource Center at
1-800-633-1468.
To adjust the Side:
1. Make sure you are in WideSide® Transducer Mode and that a WideSide® transducer is
connected, then highlight Side on the Sonar X-Press
TM
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Side setting.
(L [Left], Both, R [Right], Default = Both)
Sonar X-Press
TM
Menu
(Sonar views only)
The Sonar X-Press
TM
menu provides access to the settings most
frequently-used. Press the MENU key once while in any of the
Sonar Views to access the Sonar X-Press
Sonar Views to access the Sonar X-Press
TM
menu.
NOTE: Menu choices will vary depending on system settings such as
whether the unit is set for Advanced User mode or what transducer
is currently selected.
whether the unit is set for Advanced User mode or what transducer
is currently selected.
Sonar X-Press
TM
Menu
39