Multiquip MT-62HS ユーザーズマニュアル

Emergencies
■

  know the location of the nearest 

■

  know the location of the nearest  and 

■

In emergencies 

  know the location of the

nearest phone or 

keep a phone on the job site.

Also know the phone numbers of the  nearest
ambulance, doctor and fire department.  This
information will be invaluable in the case of an
emergency.

■ NEVER lubricate components or attempt service on a running

rammer.

■

  allow the rammer a proper amount of time to cool

before servicing.

■ Keep the rammer in proper running condition.
■ Fix damage to the rammer immediately and always replace

broken parts.

■ Dispose of hazardous waste properly. Examples of potentially

hazardous waste are used motor oil, fuel and fuel filters.

■ DO NOT use food or plastic containers to dispose of

hazardous waste.

■ NEVER use accessories or attachments, which are not

recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.

■ Whenever necessary, replace nameplate, operation and

safety decals when they become difficult read.

■ NEVER

  Run engine without air filter. Severe engine may

occur. Service air filter frequently to prevent carburetor
malfunction.

■ AVOID wearing jewelry or loose fitting clothing that may snag

on the controls or moving parts, this can cause a serious
injury.

■ ALWAYS  check to make sure that the operating area is clear

before starting the engine.

■ NEVER leave the machine unattended while running.
■

ALWAYS be sure the operator is familiar with proper safety
precautions and operations techniques before using rammer.

■

ALWAYS read, understand, and follow procedures in
Operator’s Manual before attempting to operate equipment.

■

ALWAYS store equipment properly when it is not being used.
Equipment should be stored in a clean, dry location out of the
reach of children.

■

Refer to the 

ROBIN Engine Owner's Manual for engine

technical questions or information 

recommended by Multiquip

for this equipment. Damage to the equipment and/or injury to
user may result.

■

 shutdown engine before transporting.

■ Tighten fuel tank cap securely and close fuel cock to prevent

fuel from spilling.

■ Drain fuel when transporting rammer over long distances or

bad roads.

■ When placing the rammer inside a truck-bed for transport,

always tie-down the rammer.

■ ALWAYS use proper lifting techniques when moving the

rammer.