Mitsubishi Electronics FR-E720 ユーザーズマニュアル
3
Operation panel
1.2.2
Basic operation (factory setting)
STOP
Operation mode switchover
Parameter setting
Faults history
Monitor/frequency setting
At power-ON (External operation mode)
PU operation mode
(output frequency monitor)
Parameter setting mode
PU Jog operation mode
Output current monitor
Output voltage monitor
Display the
present setting
present setting
Value change
Value change
Parameter write is completed!!
Parameter and a setting value
flicker alternately.
flicker alternately.
Parameter clear
All parameter
clear
Faults history clear
Initial value
change list
(Example)
(Example)
Frequency setting has been
written and completed!!
written and completed!!
and frequency flicker.
[Operation for displaying faults history]
Past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists, is displayed.
While a fault is displayed:
The display shifts as follows by pressing : Output frequency at the fault
Output current Output voltage Energization time.
(After Energization time, it goes back to a fault display.)
Pressing the setting dial shows the fault history number.